This blog posts about aviation, automobiles, electronics, programming, politics and such other subjects as catch my interest. The blog is based in northern New Hampshire, USA
Tuesday, June 2, 2020
Words of the Weasel Part 55
Monday, June 1, 2020
Peaceably to assemble, and to petition the Government…
For a redress of grievances. First amendment. We are talking about people carrying flags and signs and posters. Marching in daylight, down routes coordinated with local authorities. Singing and chanting. Making speeches. Listening to speeches. Dispersing and going home when the demo is over. That’s peaceable assembly.
Riots are something else. Breaking shop windows, looting, setting fires, throwing stuff at cops. We citizens expect law enforcement to break them up, suppress them. Surround them; arrest a bunch of ‘em. Use fire hoses and tear gas on em. Keep them from destroying our livelihoods. Authorities that permit, or worse encourage, law enforcement to shirk their duty should be turned out of office at the next election. Or impeached immediately.
Sunday, May 31, 2020
The Radial Arm Saw (RAS)
Back in the 50’s, when I was a kid, all the other kids’ fathers had shops, in the garage, in the basement, somewhere. And at least half of them had a radial arm saw in their shop. It was clear to all us kids that the RAS was the wave of the future and table saws were for old fuddy-duddies. My father had a table saw, inherited from my grandfather. The radial arm saw remained popular with do-it-yourselfers up thru the 80’s, maybe the 90’s. Then the safety freaks struck. They declared the radial arm saw to be dangerous, that using a standard blade was dangerous, that making rip cuts was even more dangerous, and the blade guard didn’t cover enough of the blade. The wood shop magazines carried the safety freak stories and stopped doing stories about using and buying radial arm saws. Today, in 2020 there are hardly any new ones for sale, and the price of used ones has sunk down to 50-100 bucks. You cannot buy a skilsaw for that little.
Me, I bought a radial arm saw back in the 70’s and I still have it. I never did get a table saw. I still have all my fingers too. Major benefit of the radial arm saw is it saves space in the shop. You can push it up against a wall and it works just fine. The table saw needs clearance all around it to handle big work pieces. The radial arm saw will make all the cuts a table saw can except for one not too important one. It will make all the cuts a chop saw can make and in addition it will rip, which the chop saw will not. You can also use your radial arm saw as a horizontal boring machine, a disc or drum sander, a shaper, a surface planer, and even as a bench grinder to keep your chisels sharp.
You do want to be careful. The tool is dangerous. The blade on a RAS or a table saw will sever any body part that comes in contact with it. I keep my hands three inches away from the blade at all times. If the work piece is too small to allow for three inches clearance, I throw it in the scrap box and find a bigger piece.
When ripping I first tilt the blade guard down on the in feed side to allow just enough room for the work to go into the blade but not any fingers that might be sliding or riding along the top of the work. Then I always set the anti kickback fingers to dig in and prevent the blade from throwing the work back at me. And I use a wooden shop made push stick for that last bit of push right next to the blade. If the piece is too narrow to safely push it thru the blade, I throw it in the scrap box and get a bigger piece. For tricky or difficult rip cuts I will clamp a feather board to the RAS table to keep the work pressed up against the fence.
In short I don’t see the RAS as more dangerous than the table saw. Both machines will take off fingers with the greatest of ease. You just have to be careful using them. Right now, a used RAS can be so cheap that you cannot go wrong buying it. Craigslist is your friend. If you are starting up a wood shop a RAS makes a fine start.
Cannon Ski trails are finally green
Saturday, May 30, 2020
George Floyd Killing and Burning down Minneapolis
Friday, May 29, 2020
Regulating social media.
Right now anyone with an IQ above room temperature can log on to Facebook or Twitter or U-tube or the rest of them and post any damn thing he pleases. And it goes world wide. A bunch of Islamic terrorists have claimed they were recruited sheerly thru watching terrorist propaganda on Facebook and U-tube.
The owners of the platforms are the only ones who know how to delete posts, cancel log in privileges, and post comments. We have to trust them, or shut their platforms down. I think the platform owners right along have been deleting material that is clearly offensive, pornography, nudity, sex acts, snuff videos, pedophilia, BDSM, Islamic terrorist propaganda, KKK propaganda and worse. They ought to keep on doing it. Maybe step it up some.
Then we come to individual posters who post all sorts of poppycock, anti Semitic, white supremacy, Nazi, alien invasion, and other weirdo ideas. I think maybe we ought to just leave them alone. Much of it is so weird that no body pays it attention. The offensive stuff can be replied to by those who have been offended.
And then we come to posters who are elected officials. Since they got themselves elected they have support from a majority of their constituents. That’s a lot of people who think they are OK. Same goes for opposition politicos from the major parties. As a platform owner, I myself would be extremely reluctant to censor an elected official for fear of offending a lot of people and inviting retaliation. I think the Twitter people are crazy to censor the President of the US. He has brought them all sorts of viewers/readers/tweeters. If Twitter doesn’t like what Trump tweets, surely they can find some anti trump tweeters to respond to the Donald.
If we are really unhappy with the platform owners, then we can get the anti Trust lawyers to break them up. Facebook is clearly a monopoly. We would be better off with two sites competing for viewers/readers/pageviewers.