Have your kids change a tire.

This is for kids old enough to drive.  That's 16 in most places.  Have them find the spare tire in the family car.  (Is it in the trunk? is it slung underneath the minivan? Is it on the rear hatchback? Where could a Detroit yo-yo hide the spare this year?)  And find the jack and the lug wrench.  Note to parents, if your car doesn't have a jack and a lug wrench you ought to go out and get them.  Town dump and auto junk yards ought to have old ones.  Get the kid[s] to set the parking brake before jacking up the car.  Pop the hub cap off.  Have them loosen the lug nuts while the weight of the car is on the flat wheel.  After the car is up on the jack, the necessary heave-ho needed to break the lug nuts loose may throw the car off the jack.  Loosen means less than one quarter turn.  A small can of penetrating oil will help with rusty and stuck lug nuts.  With the car jacked up, back off  all the lug nuts, put them in the hubcap, and pull the flat wheel off.  Put the spare on.  Put the lug nuts back on, tighten lightly, don't knock the car off the jack.  Lower the jack and then tighten all the lug nuts.  Put the hubcap back on.  Check the air pressure in the spare.  It has been aging in the trunk for years and it might have a slow leak and be close to flat itself.  If the spare isn't too flat, drive down to the nearest gas station that has air and pump it up.  This part is easier if you have a tire pressure gauge in the car.  They are only a few dollars at the auto parts store.  For extra credit get the kid[s] to stow the flat wheel, the jack, and the lug wrench so that they won't rattle when you hit a bump. 

British Labor Party gets new leadership

The US TV has not had a word about it, but an email reached me from the American Jewish Congress.  It congratulates the new leader of the Labor party, Ken Starmer opon his election.  The old Labor party leader, leftie Jeremy Corbyn, was outspokenly anti-Semitic,  anti-American, and an all around PITA for the Brits and for us.  Good riddance to Corbyn.  Ken Starmer is a new name to me, I never heard of him before, and I have no idea where he is coming from. 
   Surprising that the MSM has said nothing about this fairly serious change in British leadership.

Google is going wild. 1318 page views today.

Used to be blogger would show a few pageviews a day, if that.  Then I had an 800 page view day, a lull abd 1318 pageviews today.  Looks like the Google software weenies messed something up.

There are a lot of brain dead manufacturers out there

Those are the ones who fail to put their company name on their product.  If they had two brain cells firing they would always put their name and Made in USA on everything they make.  It's good for sales.  It's the best advertising they can get.
   We consumers ought to understand that products that are not marked Made in USA are probably made in China.

Why I don’t trust computer models.

A computer model is nothing more than a computer program that computes how something will change over time, Global warming, Corona virus, you name it, is going to work out.  I have written and tested plenty of computer models over a long career in R&D and programming.  When you start programming a computer model, you already have a clear idea of what you want the model to say.  If the model doesn’t say what you want it to say, you start fixing the code.  Work hard enough and the model will say what you want it to say if especially if you are willing to cheat.  One greenie climate change program had a line of code that read “If date younger than 1945 add a few degrees.  If date younger than 1955 add a few more.”  This bit of code came from the Hadley Climate Research Unit (CRU) and created Mann’s “hockey stick” plot of world temperature. 

   Any how a model (or two or other models) predicted massive infection rates of Corona virus world wide.  It is beginning to look like that model’s frightening predictions of infection, need for hospital beds, ventilators, and what ever, are not true, and the Corona virus epidemic is not as bad as the model predicted.  It is still pretty bad, but not as bad as the model predicted.

Mail in balloting is voter fraud.

What with Corona virus keeping everybody indoors, the Democrats are calling for mail in voting.  They figure the massive voter fraud this would cause will help the Democrats.  In this day and age of Xerox machines, PC's with very decent ink jet and laser printers, digital camera's everywhere to photograph any real paperwork (ballots, ID's what ever) needed to vote.  A simple program running on a  PC can crank out authentic looking ballots for every registered voter in the state.  And print address labels, or even envelopes with return addresses up in the left hand corner for them.  Add some stamps,  or go business reply mail, and you can swamp the electoral commissions with truck loads of good looking, but fake  ballots.  God help the voting commission when some one, appearing in person, demands to vote, and the town clerk refuses because the mail in ballot box stuffers have already voted that voter by mail. 
   Far as I am concerned, voters ought to brave the Corona virus infected streets, get to the polls, show their NH drivers licenses to poll workers who know everybody in town by sight,  and fill out an official ballot in a secure voting booth.  And get checked off on the voter rolls one by one. And personally drop their ballot into a ballot box.  Up here we still use antique wooden ballot boxes. 

Trump's daily Corona virus updates preempt Fox News

Used to be Brett Bauer and Britt Hume came on at 6 PM with the news of the day.  Now Trump comes on  a little of 6 PM, and briefs on the virus, zaps obnoxious lefty reporters, and takes hostile questions for about an hour.  Fox news doesn't get a shot at the audience until Trump is finished close to 7 PM.