Toy Boat Woodshop for the Kids.

    Running out of things to keep the kids interested?  Teach them some wood shop.  Make some toy boats.  Make the hull from a board, or even a bit of 2 by 4, what ever you have.  Cut a bow.  Mark the middle of the board.  Lay a square (any kind, T-square, combination square, Speed square, what ever you have) across the hull, some inches back from the bow end, and draw a pencil line clean across the hull.  They draw diagonal lines to mark the bow from the middle of the end back to the square line.  That will give a symmetrical bow when you saw both sides of it.  You can cut the bow with any kind of hand saw, cross cut, miter, hack, coping; use what ever you have.  You can leave the stern square, or you can make a pair of 45 degree cuts to round it off a bit.  You can use a plane or a spoke shave to smooth and round the hull. 

   You need a cabin, a piece of wood nailed on lengthwise.  You need a bridge that is a short piece of wood, atop the cabin and cross wise up front.  You ought to have a smoke stack, although we left that detail off a lot of toy boats we built in the distant past.  For a stack you need something round, a bit of dowel, a bit of broomstick, a bit of PVC pipe, whatever.  Drill a hole in the cabin top.  Secure it with glue, white glue of yellow carpenters glue for wood, epoxy or superglue for PVC pipe.  The glue will bond better to PVC if you clean it with hot water and soap, or solvent (alcohol, paint thinner, acetone, lacquer thinner).